Piperazine

Natural e sintéticoAROMA CHEMICALSfishy · ammoniacal

Sete perfumesUm deles está a olhar para si

SaídaPirâmide
—Intensidade
—Tenacidade
—Origens
Espécime
P
Top
Natural & Synthetic
Definição

Piperazine is a saturated six-membered ring containing two nitrogen atoms at opposite positions. It smells fishy and ammoniacal.

FISHY AMMONIACAL
Type
Ingredient
Olfactive family
Green
Instrumentos
Pirâmide
SSaída
CCoração
FFundo

Aroma

Piperazine smells fishy and ammoniacal.

A história completa

Identity

Piperazine has the CAS number 110-85-0, the molecular formula C₄H₁₀N₂ and a molecular weight of 86.14. It is a six-membered ring with two nitrogen atoms at opposite positions, and its chemical classes are piperazines and azacycloalkanes. It also serves as an anthelmintic drug.

Odour

It smells fishy and ammoniacal. At 0.10 % in dipropylene glycol the odour is ammoniacal. The solid has a typical amine odour and is pungent.

Production

It is made by condensation and de-amination of diethylenetriamine, or by condensation of diethanolamine in the presence of ammonia. It can also be prepared by the action of alcoholic ammonia on ethylene chloride, or by reducing pyrazine with sodium in alcohol.

It is used to make corrosion inhibitors, insecticides and surface-active agents, and its salts are used as anthelmintic drugs.

Use in flavours

It is a flavouring agent with a savoury flavour profile and a salty taste. The Joint FAO/WHO Expert Committee on Food Additives found no safety concern at current levels of intake when it is used as a flavouring agent.

Properties

It boils at 146 °C at 760 mmHg and melts at 106 °C. Its flash point is 81 °C. It is soluble in water and in alcohol, and it has an estimated logP of -1.171.

Safety and IFRA

No IFRA Standard covers this material itself in the 51st Amendment. Its INCI name is Piperazine and its EC number is 203-808-3. It is registered under REACH. It carries the signal word Danger and is very corrosive to skin, eyes and mucous membranes.

Extração e química

Método de extração

It is made by condensation and de-amination of diethylenetriamine, or by condensation of diethanolamine in the presence of ammonia. It can also be prepared by the action of alcoholic ammonia on ethylene chloride, or by reducing pyrazine with sodium in alcohol. It is used to make corrosion inhibitors, insecticides and surface-active agents, and its salts are used as anthelmintic drugs.

Fórmula
C₄H₁₀N₂
CAS
110-85-0
Aspeto
Colourless, needle-like crystals or white flakes
Estatuto IFRA
Ver nota

No IFRA Standard for the material itself (51st Amendment)

Propriedades físicas
Ponto de ebulição
146 to 149 °C at 760 mmHg
Ponto de fusão
106 to 109 °C at 760 mmHg
Ponto de inflamação
109.44 °C (229 °F)

Em perfumaria

In a formula it brings a fishy, ammoniacal odour.

Disponível como
synthetic

Ver também

2 notas

Fontes

8
  1. PiperazinePubChem
  2. Piperazine: chemical classification recordChEBI
  3. Good Scents odour data (Pyrfume archive)Pyrfume
  4. Leffingwell odour data (Pyrfume archive)Pyrfume
  5. Piperazine: data sheetThe Good Scents Company Information System
  6. IFRA Standards, 51st AmendmentIFRA
  7. Piperazine: cosmetic ingredient recordEuropean Commission, CosIng
  8. Piperazine: substance recordEuropean Chemicals Agency